Hindustan Aeronautics Limited
HAL
requires bright and dynamic Engineering Graduates for
appointment as Management / Design Trainees for
its Divisions / R&D Centres / Offices at Bangalore, Hyderabad, Nasik,
Koraput (Orissa), Lucknow, Kanpur, Korwa (U.P) and Barrackpore (W.B).
Eligiblity : BE/BTech Aggregate Mark 70%
No.
of Posts – 335 (approx.)
While
the number of posts in both the streams together i.e Management
Trainees / Design Trainees is approximately 335, the actual requirement may vary
based on further assessment. The Category-wise break up of the 335
posts are as follows :
| General |
180
|
| SC |
49
|
| ST |
23
|
| OBC (Non-Creamy Layer) |
83
|
Further, 18
posts out of the total 335 are reserved for Persons with Disabilities
(including backlog of 8) which shall be distributed among all the categories
indicated above.
Qualification Requirements:
| Discipline |
Grouping of Branches of
Engineering |
| ELECTRONICS |
Electronics, Electronics &
Communication, Instrumentation & Control, Instrumentation
& Electronics, Applied Electronics & Instrumentation, Electronics
& Instrumentation, Electronics & Telecommunication. |
| ELECTRICAL |
Electrical, Electrical &
Electronics, Electrical &
Instrumentation |
| MECHANICAL |
Mechanical, Mechanical &
Industrial Engg., Mechanical & Production Engg. |
| PRODUCTION |
Industrial Production,
Production Engg, Industrial Engg & Production, Mechanical
Production & Industrial Engg., Production Engg & Management, Industrial
Engg, Manufacturing Engg,
Production & Industrial Engg, Industrial Engg
& Management Manufacturing Science & Engg, Manufacturing process & Automation, Mechanical Stream –
Production Engg. |
| COMPUTER SCIENCE |
Computer Science, Computer
Engg, Computer Science & IT, Information Technology,
Information Science & Technology, Computer Systems, Information
Systems, Information Science, Software Engg., Computer Technology,
Computer Science & Engg. |
| METALLURGY |
Metallurgy, Materials &
Metallurgy, Metallurgy & Material Science, Metallurgy &
Materials Engg, Metallurgy & Materials Technology. |
| AERONAUTICAL |
Aeronautical |
Graduates in any of the above Branches of Engineering from any
recognized Institution / University with a
minimum 70 % marks in the aggregate of all semesters in respect of General / OBC
candidates and a minimum of 60 % Marks in
the aggregate of all semesters in respect of SC / ST candidates OR corresponding
CGPA Ratings / Gradations are only eligible to apply. In the Aeronautical
Branch, the minimum percentage of marks
applicable shall be 60 % for Gen / OBC and 50 % for SC / ST.
Candidates who have passed Degree in Engg in the Branches
specified above and obtained the prescribed
percentage of marks as on the last date prescribed for submission of application
(18.7.05) need only apply. Candidates who
have appeared in their final year or whose results are awaited need not
apply.
Age: Not above 28 years
as on 01.07.2005 for General candidates. Upper age limit is relaxable by 5 years in respect of SC/ST candidates and 3 years
in respect of OBC candidates. Candidates belonging to
OBC Category are required to produce recently obtained Community Certificate in
proof of their Community at the time of
Interview (not older than 6 months as on 01.07.2005), stating that they do not come under the creamy layer, from a Competent
Authority, in the prescribed format. In respect of
Persons with Disabilities (PWDs), upper age limit is relaxable by 10 years,
which will be over and above the relaxation
admissible for candidates belonging to SC/ST/OBC. For candidates who had ordinarily
been domiciled in the State of Jammu & Kashmir during the period of
01-01-1980 to 31-12-1989, upper age limit is relaxable by 5 years. Relaxation
will be extended as per rules in respect of Ex-servicemen/
Commissioned Officers/ECOs/SSCOs who have rendered at least 5 years of Defence service and have been released on completion of
assignment.
Application Fee: Rs.200/-
(wherever applicable), which is non-refundable, is to be sent in the form of crossed Demand Draft drawn on any Nationalized
Bank (preferably Indian Bank or State Bank of India)
in favour of ‘Hindustan Aeronautics Ltd’, payable at Bangalore. Candidates
belonging to SC / ST/ PWD category are exempted from payment of Application Fee.
The Demand Draft should have been obtained
between the period 4.7.05 and 18.7.05.
Service Bond: Selected
candidates shall execute a Bond to serve the Organisation for a period of 5 years (excluding the training period) or reimburse
the actual training expenses (including all the remuneration
paid/expenses incurred during the training period), subject to a maximum of Rs.3,00,000/-.
Training and Stipend: Selected
candidates will be imparted Theoretical / On-the-Job Training for a period
of One Year. During the training period of 52 weeks, the Management/ Design
Trainees shall draw minimum emoluments of
approx. Rs.13000/- p.m, comprising of Basic Pay of Rs.8600/- + Variable
DA (51.2 % of Basic Pay at present). Besides, CCA & HRA / Bachelor's
Accommodation would also be admissible
during training period as per rules, depending upon the place of posting.
Selection Procedure:
Eligible candidates will have to appear for an Objective Type Competitive Written Test at their own expense. Written Test
will be held at Bangalore, Mumbai, Delhi, Kolkata, Hyderabad
& Bhubaneswar. Written Test Centre once opted cannot be changed. However,
HAL may at its discretion decide not to
conduct Written Test in any of the above mentioned Cities or to conduct the
Written Test at other Cities as well and may assign a candidate to a place other
than the one opted by him. Candidates will
have the option to write the Written Test in English or Hindi and the option
once exercised shall be final. Candidates short-listed based on the performance
in the Written Test only will be called for
Interview. Selected candidates would be posted as Design Trainees or as Management
Trainees, in any of the Divisions / R&D Centres/Offices, based on the
requirements of the Company.
Absorption: On
successful completion of the training, the Management Trainees (MTs) / Design Trainees (DTs) would be absorbed as Engineers /
Design Engineers and placed at the minimum of the Scale
of Pay of Rs.8600-250-14600 (Grade – II). On absorption, besides Basic Pay,
DA, HRA / Company Accommodation & CCA,
the Candidates will be eligible for Allowances like Magazine Allowance,
Washing Allowance, Conveyance Allowance / Reimbursement, Profit Linked
Incentive, Quarterly Performance Pay, LTA/LTC
etc. Other benefits like Leave, Medical Facilities, PF, Gratuity etc would
also be admissible as per Company Rules.
Health: Applicants
should be of sound health and should meet the medical standards prescribed by the Company. Appointment of selected candidates
will be subject to receipt of satisfactory medical report
from the Company’s Doctor as per the Medical Standards of the Company.
General Conditions: Only
Indian Nationals need apply. Mere submission of application will not entail right for claiming appointment. Applicants serving
in Govt./Public Sector should produce `NOC’ at the time
of Interview failing which they will not be permitted to appear for the
Interview. Appointment of selected
candidates is subject to verification of Caste and Character & Antecedents,
as the case may be, from the concerned
authorities as per the rules of the Company.
How to Apply:
Applications should be submitted strictly `ONLINE’
by logging on to HAL Website www.hal-india.com
Applications will not be accepted through any other mode. The last date for submission of application is
18.07.2005.
The Website will be kept open till 2400
hours on 18.07.2005
for this purpose. Candidates are
allowed to apply only once and application once submitted
cannot be altered under any circumstance. Candidates are required to possess a
valid email ID, which is to be entered in
the Application Blank ONLINE, so that intimation regarding downloading
of call letter for Written test/Interview can be sent. HAL will not be
responsible for bouncing of any e-mail sent
to the candidates. However, necessary information will be hosted on our Website
from time to time. Candidates other than SC/ST and PWD are required to furnish
the details of Demand Draft in order to
register their application Online. On submission and acceptance of application,
the System will generate an Application Reference Number. The Candidate is
required to write his/her Name and the
Application Reference Number allotted, on the reverse side of the Demand Draft,
which may be forwarded to the Senior Manager (HRD), HAL Corporate Office, 15/1,
Cubbon Road, Bangalore-560 001, so as to
reach him latest by 23rd July 2005. In case of any difficulty, contact
us at [email protected].
Tentative Schedule*:
Date for downloading Admit Card : 22.07.2005
Date of Written Test : 07.08.2005
Date of WT Results on HAL Website : 17.08.2005
* Any change in the schedule would be notified on HAL Website.
(ref : http://www.hal-india.com/Advt%20MTs%20&%20DTs.pdf) www.freshersworld.com |